The reaction kettle, I believe you are not familiar with it. Some are called reaction tanks, others are agitator and stainless steel reaction pot. They are widely used in resins, cosmetics, pharmaceuticals, nectarine coatings and other industries, and are typical reaction equipments in chemical production. 

 

Then, then, we ll see, what do we have to pay attention to in the maintenance and daily maintenance? The first to cool the reactor, and then the gas in the reactor through a pipeline leak to the outside, so that the pressure inside the autoclave to atmospheric pressure, attention must not bring pressure removed, then the main bolt and nut symmetrically loosen unloaded, and finally carefully remove the kettle cover (or rising kettle cover are arranged in the bracket) and at the same time, should pay particular attention to the protection of the sealing surface cover unloading process.

 In the end, what do we have to pay attention to in our daily maintenance?

1、When installing the reaction kettle, we should pay attention to the explosion-proof and multi reaction kettle equipment. It needs to be separated to ensure good ventilation.

2、The selection of heat transfer oil must be the corresponding model, and can not contain water to add.

3、After installing the reactor, nitrogen pressure is maintained to ensure that no leakage can start. If leakage is found, use the soap to find out the leak points of the pipe and the pipeline, and find out the gas tightening and nitrogen holding.

4、Metal blasting pieces can not be adjusted at will. When the metal blasting piece is blasting, it needs to be replaced. When replacing the metal blasting pieces, pay attention to the upward of the convex surface of the blasting piece.

5、Safety valves, distillation holes, electric heating rods, pressure gauges and electrical instruments are checked regularly, and repair is found in time.

6、When the reactor is not used, the pot body is washed and the inner and outer walls of the container are cleaned with warm water, so as to keep clean, make the equipment more durable, and so on.